Drizza prua 12mm x 45m Gottifredi Maffioli Easycruise cima da vela pre-impiombata
SKU:
N/A
Marca:
Gottifredi Maffioli
This range of standard pre-made halyards has been designed to make replacing halyards on your sailing boat quick and simple. They come in three standard colours: grey, navy blue and red.
This is a basic specification for a 1:1 forward halyard (genoa / spinnaker) made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Ronstan Triggersnap shackle, for connection to your sail. This 12mm diameter x 45m long halyard is recommended for use on masts with an “I” measurement of between 16 – 18m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 genoa / spinnaker halyard length:
2.1 * I (Isp) + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
This is a basic specification for a 1:1 forward halyard (genoa / spinnaker) made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Ronstan Triggersnap shackle, for connection to your sail. This 12mm diameter x 45m long halyard is recommended for use on masts with an “I” measurement of between 16 – 18m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 genoa / spinnaker halyard length:
2.1 * I (Isp) + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifiche
| Ropes | |
|---|---|
| Ø cima (mm) | 12 |
| Materiale dell'anima della cima | Bio Based Dyneema®/ Polypropylene blend |
| Ferramenta | Ronstan Triggersnap - 111mm |
| Boat | |
|---|---|
| Dimensione barca consigliata - Max (ft) | 46 |
| Dimensione barca consigliata - Min (ft) | 39 |
| Stile di navigazione | All-Purpose |
| Adatto per P/I (m) | 16 - 18 |
| Dimensions | |
|---|---|
| Lunghezza (m) | 45 |
| Undefined | |
|---|---|
| Colore* | Grey oppure Navy Blue oppure Red |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
