Avvolgigenoa manuali
Manual genoa furlers are mechanical headsail handling systems designed to furl, reef, and deploy overlapping and non-overlapping genoas without the use of electric or hydraulic power. Operated via a continuous furling line, these systems transmit torque through a deck-mounted drum and foil assembly installed over the forestay. Manual genoa furlers remain the most widely specified solution on cruising and performance sailing yachts due to their mechanical simplicity, reliability, and predictable load behaviour. Read more...
How Manual Genoa Furlers Work
A manual genoa furler consists of several mechanically integrated components:
- Furling drum at deck level, rotated by a continuous furling line
- Foil or extrusion system fitted over the forestay, supporting the sail luff tape
- Upper swivel that allows the sail to rotate while the halyard remains stationary
- Bearing assemblies designed to manage axial and radial loads under sail
When the furling line is pulled, the drum rotates and transmits torque up the foil, rolling the genoa evenly around the forestay. The efficiency of a manual genoa furler depends heavily on bearing quality, foil stiffness, and correct halyard lead angle, particularly when furling under load or reefing partially.
Key Design Considerations for Manual Genoa Furlers
Bearing Systems and Load Handling
Manual genoa furlers must operate smoothly under constant forestay tension and fluctuating sail loads. High-quality systems use multi-race stainless steel or Torlon® ball bearings to reduce friction and prevent point loading. Bearing capacity should be selected based on actual rig loads and displacement, not solely on yacht length.
Foil Profile and Torsional Stiffness
The foil transmits torque from the drum to the head swivel. Insufficient torsional stiffness can result in uneven furling or delayed rotation at the top of the sail. Modular aluminium foil sections with tight tolerances help maintain consistent sail roll and improve reliability when reefing larger genoas.
Halyard Management
Manual genoa furlers rely on correct halyard geometry to avoid halyard wrap. Integrated halyard deflectors or angled swivels ensure the halyard exits the mast at a safe lead angle, maintaining consistent rotation and reducing wear on the swivel bearings.
| Yacht Size (LOA) | Typical Displacement | Forestay Ø (approx.) | Key Load Consideration | Recommended Furler Characteristics |
|---|---|---|---|---|
| 30–35 ft | 4–6 t | 6–7 mm | Moderate furling loads, frequent use | Compact drum, standard bearing races, aluminium foil |
| 36–42 ft | 6–9 t | 7–9 mm | Higher forestay tension, overlapping genoas | Larger bearing capacity, stiffer foil sections |
| 43–50 ft | 9–14 t | 9–11 mm | Sustained load when reefed | Oversized bearings, high torsional stiffness |
| 50+ ft | 14 t+ | 11 mm+ | High righting moment, heavy sail area | Heavy-duty bearing systems, reinforced load paths |
Key Manual Genoa Furler Brands
Harken Manual Genoa Furlers
Harken genoa furlers are commonly used on performance cruisers and race-oriented yachts. Their systems emphasise low-friction bearing assemblies and modular foil construction, allowing precise matching to forestay diameter and sail configuration. These furlers are frequently paired with higher rig tensions and laminate or composite sails.
Ubi Maior Manual Genoa Furlers
Ubi Maior genoa furlers are engineered for high load capacity in compact assemblies, making them suitable for heavier displacement yachts or applications with sustained sail loads. Oversized bearing races and direct load paths are a defining feature, prioritising durability and structural integrity over minimal system weight.
Facnor Manual Genoa Furlers
Facnor genoa furlers are widely specified on cruising and offshore yachts. Their designs typically focus on sealed bearing units and straightforward installation, reducing long-term maintenance requirements. Facnor systems are often selected where reliability and ease of service are key decision factors.
Applications of Manual Genoa Furlers
Cruising Yachts
On cruising yachts, manual genoa furlers allow controlled reefing as conditions change, reducing the need for headsail changes on deck. Smooth furling under load is critical, particularly when sailing partially furled for extended periods.
Offshore and Short-Handed Sailing
For short-handed crews, manual genoa furlers improve safety by limiting time spent on the foredeck. Mechanical systems are often preferred offshore due to their predictable behaviour and independence from onboard power systems.
Performance Cruising
In performance cruising applications, manual genoa furlers must maintain sail shape when reefed. Foil stiffness, halyard lead geometry, and bearing efficiency all play a role in maintaining acceptable luff tension and pointing ability.
Installation and Specification Considerations
Correct specification of a manual genoa furler requires attention to:
- Forestay diameter, construction, and terminal type
- Maximum luff length and sail overlap
- Deck clearance and available drum height
- Compatibility with existing furling lines and lead blocks
Improper sizing or installation can result in high friction, uneven furling, or premature bearing wear. For larger yachts, professional rigging installation is strongly recommended.
Summary on Genoa Furlers
Manual genoa furlers remain the most widely used headsail furling solution due to their mechanical reliability, load transparency, and ease of maintenance. Systems from Harken, Ubi Maior, and Facnor offer differing approaches to bearing design, foil stiffness, and load capacity, allowing sailors to select equipment suited to their specific rig and sailing profile. When correctly specified and installed, a manual genoa furler provides efficient sail handling across a broad range of cruising and performance applications.
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
