Turnbuckles
Turnbuckles connect the shrouds and stays to the chainplates and set the tension in the standing rigging. We stock Ronstan Type 10 turnbuckles with their swage terminals and lock nuts, Selden and 1852 rigging screws, and Blue Wave Smart Pins to secure them. Choose by wire diameter, thread size and breaking load, and by the end fittings your rig needs. Read more...
What turnbuckles do in the standing rigging
Turnbuckles sit at the lower end of each shroud and stay, between the wire and the chainplate. Turning the body draws the threaded ends together or apart, which shortens or lengthens the stay and sets the rig tension and the mast's tune. The same part has several names: turnbuckle is the usual term in American English and in the rigging catalogues, bottlescrew and rigging screw are used in the UK, and translations often call it a shroud tensioner. Because the full load of the stay passes through it, a turnbuckle is a structural part of the rig, sized like the wire it holds.
Single-end or double-end turnbuckles?
Conventional turnbuckles have a left-hand thread at one end and a right-hand thread at the other, so turning the body moves both ends at once; the 1852 and Selden rigging screws work this way. Ronstan's Type 10 turnbuckles are adjusted from one end only: a free-turning adjustment nut inside the closed body runs on a fine UNF thread, and a lock nut holds the setting. Ronstan states this makes them easier to adjust, and a sight hole in the body shows whether the thread is engaged far enough. Both types do the same job; what matters is that the replacement matches the thread and end fittings of the rest of the stay.
Sizing turnbuckles to wire, thread and load
Start with the wire diameter, then the thread that goes with it. Our turnbuckles and terminals cover wire from 3 to 10 mm, with UNF threads from 1/4" UNF turnbuckles to 3/4" and metric threads from M5 to M12 on the 1852 range. The same wire can come with more than one thread, and the larger thread is usually the stronger fitting, as Ronstan's swage terminals show:
| Wire Ø | Thread | Breaking load (Ronstan) |
|---|---|---|
| 4 mm | 1/4" UNF | 1,480 kg |
| 4 mm | 5/16" UNF | 1,780 kg |
| 5 mm | 5/16" UNF | 2,360 kg |
| 5 mm | 3/8" UNF | 2,550 kg |
| 6 mm | 3/8" UNF | 3,580 kg |
Ronstan notes that some threaded terminals have a breaking load below that of the 1x19 wire they fit, so check the terminal and the turnbuckle, not only the wire, against the load on the stay. Use the 6 mm wire filter or the other wire sizes to narrow the choice.
End fittings: forks, toggles and swage studs
Each end of a turnbuckle has to match what it connects to: a fork or toggle onto the chainplate, and a fork, eye or swage stud onto the wire. A toggle lets the turnbuckle line up with the load as the mast moves, so the thread is never bent sideways; Yachting Monthly's rig check advises that toggles should move freely, but only the way they are meant to. Ronstan's swage terminals suit standard roll-swaging presses and 1x19, 7x19 and compact strand wire. For the separate parts, see our wire fittings and rigging toggles.
Materials and thread galling
Stainless steel threads turning in stainless steel under load can gall: the surfaces seize and tear. Ronstan avoids this with a grade 316 stainless body and an aluminium bronze adjustment nut. Many traditional rigging screws use a bronze body for the same reason. Whatever the material, lubricate the threads before adjusting: Yachting Monthly warns never to force a dry bottlescrew, but to apply Tef-Gel or penetrating oil first, as forcing it can strip the thread.
Turnbuckles with toggles on the shroud chainplates
Ranges and brands
Ronstan Type 10 turnbuckles are sold as parts: turnbuckle bodies with toggle end and lock nut, swage terminals, lock nuts and a handle kit, so a stay can be built or repaired piece by piece. Some Ronstan sizes are clearance stock and won't be restocked. Selden rigging screws come with toggle or fork ends and swage studs for 4, 6 and 7 mm wire. The 1852 shroud turnbuckles are stainless fork/fork turnbuckles with metric threads. Blue Wave Smart Pins are not turnbuckles but locking pins for them.
Locking and protecting turnbuckles
Once set, a turnbuckle must be locked so it cannot unwind: with its lock nut on the Ronstan Type 10, or with split pins through the studs. Split pins are traditionally taped over so they don't tear sails. Blue Wave Smart Pins combine a stainless pin with a UV-resistant hook-and-loop strap wrapped round the body, so no tape is needed and they come off quickly for re-tuning. A turnbuckle cover does the same job for the whole fitting.
Turnbuckles FAQ
What size turnbuckle do I need?
The one that matches your wire diameter and the thread of the existing terminals, with a breaking load at least equal to the wire's. Measure the thread or read it from the old fitting before ordering.
Can I adjust a turnbuckle without tools?
Ronstan's handle kit fits its 5/16" threaded Sealoc turnbuckles and has an 87 mm arm that folds down when not in use. Other turnbuckles are turned with a spanner or a bar, holding the wire still with a second spanner.
How tight should the shrouds be?
Your mast maker's tuning guide gives the figure, usually as a percentage of the wire's breaking load. Yachting Monthly gives a check without a gauge: on 1x19 wire, 1 mm of stretch over 2,000 mm is about 5% of breaking load, whatever the diameter.
When should turnbuckles be replaced?
When they are cracked, bent, discoloured or no longer turn freely, or when the thread is damaged. Check them at every rig inspection.
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
