Blow molded utility fender
The POLYFORM® G-fenders are blow molded from marine-grade Vinyl material. Intended to be used as typically light-weight utility fenders - but still designed with re-enforcing ribs along the length of the fender body - to assure added strength and abrasion resistance. These fenders are fitted with the V-10 all-plastic valve and securing valve-screw.
The G-fenders are suitable for smaller and medium size pleasure crafts.
If in doubt about size refer to the fender guide in "media" section
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Boat | |
|---|---|
| Recommended Boat size - Max (ft) | 40 |
| Recommended Boat size - Min (ft) | 20 |
| Dimensions | |
|---|---|
| Eye Ø (mm) | 1.9 |
| Outside Ø (mm) | 224 |
| Total height (mm) | 681 |
| Volume (L) | 19.3 |
| Material | |
|---|---|
| Material | Soft PVC |
| Undefined | |
|---|---|
| Colour* | Black or Blue or Grey or Navy Blue or Red or White |
| Inflatable* | No |
| Compatibility | |
|---|---|
| Series* | G |
| Weight | |
|---|---|
| Weight (g) | 1996 |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
