Specifications for Antal 16 2-Speed Self-Tailing Aluminium Race Winch
| Ropes | |
|---|---|
| Cabo recomendado - Ø máx (mm) | 10 |
| Cabo recomendado - Ø mín (mm) | 6 |
| Boat | |
| Estilo | Self-Tailing |
| Dimensions | |
| Ø de base (mm) | 112 |
| Ø del tambor (mm) | 71 |
| Altura (mm) | 119 |
| Winches | |
| Relación de engranajes 1 (X : 1) | 1 |
| Relación de engranajes 2 (X : 1) | 2 |
| Velocidades (manual) | 2-Speed |
| Recogida de cabo por vuelta - 1ª velocidad (mm) | 229 |
| Recogida de cabo por vuelta - 2ª velocidad (mm) | 115 |
| Relación de potencia 1 (X : 1) | 7 |
| Relación de potencia 2 (X : 1) | 14 |
| Material | |
| Material | Aluminium |
| Undefined | |
| Tamaño | 16 |
| Weight | |
| Peso (g) | 2000 |
| Garantía (años) | 3 |
|
Antal Winch Selection Guide.pdf
|
|
|
|
Antal_XT16.2 R_Exploded view.pdf
Exploded View of Antal Winch XT16.2_R
|
|
|
|
Antal_Installation_and_Maintenance_Manual_XT16.2_XT30.2_635809481143518786.pdf
|
|
|
|
Antal_Winches_Catalogue.pdf
|
|
|
|
WP - Winch selection guide.pdf
|
Two Speed Winch: Direct, Reduced
The two smallest models (XT16.2 and XT30.2) have one reduced speed, giving a slow but powerful gear and addition of a direct speed, giving a faster recovery gear, which, combined with reduced weight and an automatic self-tailing for very thin lines, makes these models the best choice for racing.
HARD BLACK ALUMINIUM (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing, with a differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum.
NEW SELF-TAILING XT SYSTEM: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm.
XT RACE SERIES: The racing winch series is modelled on the XT winch series, but also includes aluminium stem, peek roller bearings for the drum and the main shaft and lightened gears and main shaft.
Especificaciones
| Ropes | |
|---|---|
| Cabo recomendado - Ø máx (mm) | 10 |
| Cabo recomendado - Ø mín (mm) | 6 |
| Boat | |
|---|---|
| Estilo | Self-Tailing |
| Dimensions | |
|---|---|
| Ø de base (mm) | 112 |
| Ø del tambor (mm) | 71 |
| Altura (mm) | 119 |
| Winches | |
|---|---|
| Relación de engranajes 1 (X : 1) | 1 |
| Relación de engranajes 2 (X : 1) | 2 |
| Velocidades (manual) | 2-Speed |
| Recogida de cabo por vuelta - 1ª velocidad (mm) | 229 |
| Recogida de cabo por vuelta - 2ª velocidad (mm) | 115 |
| Relación de potencia 1 (X : 1) | 7 |
| Relación de potencia 2 (X : 1) | 14 |
| Material | |
|---|---|
| Material | Aluminium |
| Undefined | |
|---|---|
| Tamaño | 16 |
| Weight | |
|---|---|
| Peso (g) | 2000 |
| Garantía (años) | 3 |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
