Drizza randa 12mm x 35m Gottifredi Maffioli Easycruise cima da vela pre-impiombata
SKU:
N/A
Marca:
Gottifredi Maffioli
This range of standard pre-made halyards has been designed to make replacing halyards on your sailing boat quick and simple. They come in three standard colours: grey, navy blue and red.
This is a basic specification for a 1:1 main halyard made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Wichard 12mm D Shackle, for connection to your mainsail.
The choice between 10mm and 12mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 12mm diameter x 35m long halyard is recommended for use on masts with a “P” measurement of between 12 – 14m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 main halyard length:
2.1 * P + [distance from boom to deck] + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
This is a basic specification for a 1:1 main halyard made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Wichard 12mm D Shackle, for connection to your mainsail.
The choice between 10mm and 12mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 12mm diameter x 35m long halyard is recommended for use on masts with a “P” measurement of between 12 – 14m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 main halyard length:
2.1 * P + [distance from boom to deck] + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifiche
| Ropes | |
|---|---|
| Materiale dell'anima della cima | Dyneema® oppure Bio Based Dyneema®/ Polypropylene blend |
| Ø cima (mm) | 12 |
| Ferramenta | Wichard D Shackle - 12mm |
| Boat | |
|---|---|
| Dimensione barca consigliata - Max (ft) | 38 |
| Dimensione barca consigliata - Min (ft) | 30 |
| Stile di navigazione | All-Purpose |
| Adatto per P/I (m) | 12 - 14 |
| Dimensions | |
|---|---|
| Lunghezza (m) | 35 |
| Undefined | |
|---|---|
| Colore* | Grey oppure Navy Blue oppure Red |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
