Drizza prua 8mm x 30m Gottifredi Maffioli Powersprint cima da vela pre-impiombata
SKU:
N/A
Marca:
Gottifredi Maffioli
This range of standard pre-made halyards has been designed to make replacing halyards on your sailing boat quick and simple. They come in three standard colours: grey, navy blue and red.
This is a performance specification for a 1:1 forward halyard (genoa / spinnaker) made from Powersprint, from Italian rope makers Gottifredi Maffioli, with an SK78 Dyneema® core and durable polyester cover. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Ronstan Triggersnap, for connection to your sail. The choice between 8mm and 10mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 8mm diameter x 30m long halyard is recommended for use on masts with an “I” measurement of between 10 – 12m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 genoa / spinnaker halyard length:
2.1 * I (Isp) + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
This is a performance specification for a 1:1 forward halyard (genoa / spinnaker) made from Powersprint, from Italian rope makers Gottifredi Maffioli, with an SK78 Dyneema® core and durable polyester cover. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Ronstan Triggersnap, for connection to your sail. The choice between 8mm and 10mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 8mm diameter x 30m long halyard is recommended for use on masts with an “I” measurement of between 10 – 12m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 genoa / spinnaker halyard length:
2.1 * I (Isp) + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifiche
| Ropes | |
|---|---|
| Ø cima (mm) | 8 |
| Materiale dell'anima della cima | Dyneema® SK78 |
| Ferramenta | Ronstan Triggersnap - 94mm |
| Boat | |
|---|---|
| Dimensione barca consigliata - Max (ft) | 33 |
| Dimensione barca consigliata - Min (ft) | 26 |
| Stile di navigazione | Performance |
| Adatto per P/I (m) | 10 - 12 |
| Dimensions | |
|---|---|
| Lunghezza (m) | 30 |
| Undefined | |
|---|---|
| Colore* | Grey oppure Navy Blue oppure Red |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
