Drisse de grand-voile 10mm x 30m Gottifredi Maffioli Easycruise cordage de voile pré-épissé
SKU:
N/A
Marque:
Gottifredi Maffioli
This range of standard pre-made halyards has been designed to make replacing halyards on your sailing boat quick and simple. They come in three standard colours: grey, navy blue and red.
This is a basic specification for a 1:1 main halyard made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Wichard 10mm D Shackle, for connection to your mainsail.
The choice between 8mm and 10mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 10mm diameter x 30m long halyard is recommended for use on masts with a “P” measurement of between 10 – 12m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 main halyard length:
2.1 * P + [distance from boom to deck] + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
This is a basic specification for a 1:1 main halyard made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Wichard 10mm D Shackle, for connection to your mainsail.
The choice between 8mm and 10mm diameter at this length will come down to the setup of your specific boat and will generally be dictated by your existing sheaves and halyard clutches This 10mm diameter x 30m long halyard is recommended for use on masts with a “P” measurement of between 10 – 12m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat.
We use the following formulae for 1:1 main halyard length:
2.1 * P + [distance from boom to deck] + [distance from mast to halyard winch] + 2m
It is better to have a halyard 2-3m too long than too short!
You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Spécifications
| Ropes | |
|---|---|
| Ø cordage (mm) | 10 |
| Rope core material | Bio Based Dyneema®/ Polypropylene blend |
| Hardware | Wichard D Shackle - 10mm |
| Boat | |
|---|---|
| Taille bâteau recommandée - Max (ft) | 33 |
| Taille bâteau recommandée - Min (ft) | 26 |
| Sailing Style | All-Purpose |
| Suitable for P/I (m) | 10 - 12 |
| Dimensions | |
|---|---|
| Longueur (m) | 30 |
| Undefined | |
|---|---|
| Couleur | Gris ou Bleu marine ou Rouge |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
