Specifications for Ronstan Series 160 furler - Top swivel lashing pin
| Matériau | Acier inoxydable |
| Ø axe (mm) | 10 |
| Charge de travail (kg) | 3000 |
| Charge de rupture (kg) | 6000 |
| A (mm) | 8 |
| B (mm) | 33,8 |
| C (mm) | 12 |
| D (mm) | 9,9 |
| E (mm) | 59,8 |
| F (mm) | 28 |
| Poids (g) | 90 |
Product specifications
are provided for guidance only, subject to error /
change and without warranty or guarantee. Refer to
manufacturer’s own datasheets / manuals for further
information.
|
R-RS216100_Ronstan S160 Gen 2 Top Down Furler Manual_001.pdf
Ronstan Series 160 Gen 2 Top Down Furler Manual
|
|
|
|
R-RS216000_Ronstan S160 Gen 2 Bottom Up Furler Manual_001.pdf
Ronstan Series 160 Gen 2 Bottom Up Furler Manual
|
|
|
|
R-RS216100_Ronstan S160 Gen 2 Top Down Furler Drawing_001.PDF
Ronstan S160 Gen 2 Top Down Furler Technical Drawing
|
|
|
|
R-RS216000_Ronstan S160 Gen 2 Furler Drawing_001.PDF
Ronstan S160 Gen 2 Furler Technical Drawing
|
Ronstan's range of continuous line furling systems puts great performance and reliability within the reach of cruising and racing sailors alike. This lashing pin can be used in place of the clevis pin on the top swivel to provide a more positive drive to the head of the sail. This helps to ensure a tight furl at the head. The head of the sail is lashed to the cotton reels on the ends of the pin while the torsion rope and thimble are attached to the centre section of the pin.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Spécifications
| Matériau | Acier inoxydable |
| Ø axe (mm) | 10 |
| Charge de travail (kg) | 3000 |
| Charge de rupture (kg) | 6000 |
| A (mm) | 8 |
| B (mm) | 33,8 |
| C (mm) | 12 |
| D (mm) | 9,9 |
| E (mm) | 59,8 |
| F (mm) | 28 |
| Poids (g) | 90 |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
