This range of standard pre-made halyards has been designed to make replacing halyards on your sailing boat quick and simple. They come in three standard colours: grey, navy blue and red. This is a basic specification for a 1:1 main halyard made from a durable double braid polyester Easycruise, from Italian rope makers Gottifredi Maffioli. At the cockpit end, it is finished with a Flemish eye (to simplify running halyards through the mast) and at the working end it has a covered eye splice plus a Wichard 8mm D Shackle, for connection to your mainsail. This 8mm diameter x 25m long halyard is recommended for use on masts with a “P” measurement of between 8 – 10m. However, due to variations in cockpit setups, we suggest you double check the appropriate length for your own boat. We use the following formulae for 1:1 main halyard length: 2.1 * P + [distance from boom to deck] + [distance from mast to halyard winch] + 2m It is better to have a halyard 2-3m too long than too short! You can also extend the life of an over-length halyard by re-splicing it and running it in the opposite direction.