Specifications for Antal 70 2-Speed Electric (Horizontal) 12V Aluminium Winch (2-Speed Manual)
| Empfohlener max. Leinendurchmesser (mm) | 18 |
| Empfohlener min. Leinendurchmesser (mm) | 10 |
| Skirt Details | Black Aluminium |
| Größe | 70 |
| Style | Horizontal |
| Leistung (W) | 1500 |
| Deckstärke max. (mm) | 74 |
| Voltage (V) | 12 |
| Material | Aluminium |
| Line recovery per rotation - 1st gear (mm) | 59 |
| Line recovery per rotation - 2nd gear (mm) | 23 |
| Basis Ø (mm) | 290 |
| Trommel Ø (mm) | 144 |
| Höhe (mm) | 285 |
| Motor Length (mm) | 311 |
| Gänge (manuell) | 2-Speed |
| Garantie (Jahren) | 3 |
| A (mm) | 199 |
| B (mm) | 311 |
| C (mm) | 115 |
| D (mm) | 290 |
| d (mm) | 144 |
| E (mm) | 74 |
| H (mm) | 285 |
| Speed (Motor) | 2-Speed |
| Getriebuntersetzung 1. Gang (X : 1) | 7.8 |
| Getriebuntersetzung 2. Gang (X : 1) | 20,1 |
| Kraftuntersetzung 1. Gang (X : 1) | 27,1 |
| Kraftuntersetzung 2. Gang (X : 1) | 69.8 |
| Pulling load - Max (kg) | 2900 |
| Line speed - 1st gear (m/min) | 9 |
| Line speed - 2nd gear (m/min) | 3,5 |
| Gewicht (g) | 35900 |
Two Reduced Speed Electric Horizontal Winch
Models XT66 and XT70 are powered with a 1500 Watt, 12 or 24 Volt motor. Two switches, one control box and one breaker complete the system.
HARD BLACK ALUMINIUM (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing, with a differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum.
NEW SELF-TAILING XT SYSTEM: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm.
HORIZONTAL AND VERTICAL MOTORS - All the winches may be equipped with a horizontal motor and gearbox with a worm screw. The largest models may be supplied with a vertical motor which uses a high-efficiency hypocycloid speed reducer. Both solutions have been studied to ensure particularly compact dimensions and maximum silent operation.
MANUAL USE - Simply insert the handle to disconnect the gearbox-motor unit. Greater safety: accidental starting of the motor does not affect the winch, avoiding dangerous turning of the handle. Greater efficiency: the gearbox-motor unit does not turn in manual use, avoiding needless friction.
Spezifikationen
| Empfohlener max. Leinendurchmesser (mm) | 18 |
| Empfohlener min. Leinendurchmesser (mm) | 10 |
| Skirt Details | Black Aluminium |
| Größe | 70 |
| Style | Horizontal |
| Leistung (W) | 1500 |
| Deckstärke max. (mm) | 74 |
| Voltage (V) | 12 |
| Material | Aluminium |
| Line recovery per rotation - 1st gear (mm) | 59 |
| Line recovery per rotation - 2nd gear (mm) | 23 |
| Basis Ø (mm) | 290 |
| Trommel Ø (mm) | 144 |
| Höhe (mm) | 285 |
| Motor Length (mm) | 311 |
| Gänge (manuell) | 2-Speed |
| Garantie (Jahren) | 3 |
| A (mm) | 199 |
| B (mm) | 311 |
| C (mm) | 115 |
| D (mm) | 290 |
| d (mm) | 144 |
| E (mm) | 74 |
| H (mm) | 285 |
| Speed (Motor) | 2-Speed |
| Getriebuntersetzung 1. Gang (X : 1) | 7.8 |
| Getriebuntersetzung 2. Gang (X : 1) | 20,1 |
| Kraftuntersetzung 1. Gang (X : 1) | 27,1 |
| Kraftuntersetzung 2. Gang (X : 1) | 69.8 |
| Pulling load - Max (kg) | 2900 |
| Line speed - 1st gear (m/min) | 9 |
| Line speed - 2nd gear (m/min) | 3,5 |
| Gewicht (g) | 35900 |
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
