- Drum diameter (mm):182
- Furling line length (m):rope: 9 / webbing:10.5
- Rope diameter (mm):8
- Recommended Boat size - Min (ft):20
- Recommended Boat size - Max (ft):26
- Headstay length Std. (mm):8400
- Wire diameter Max (mm):5
- Luff tape (mm):5
- Extrusion weight (g/m):577
- Extrusion Diameter (mm):28
- Extrusion Section Code:SX25
- Luff Groove (Single/Double):D
The Facnor FlatDeck furler is an innovative furling system that uses webbing as the furling line, instead of a traditional furling rope. The webbing is guided onto the drum and stacks neatly on top of itself, which provides three significant benefits: 1) It removes the possibility of line over-rides - a common problem on traditional drums. 2) It allows a significantly lower profile drum which in turn, increases available luff length for the genoa and finally, 3) With the sail fully unfurled, the diameter of the webbing is at its maximum on the drum which increases the power for the start of the furl over a traditional furler using rope.
The drum webbing is connected to a rope with a swivel that prevents the webbing from twisting and allows the rope to be put on a winch, in the normal way.
The Flatedeck Standard kit includes: Drum, internal turnbuckle fitting, short link plates, foil sections + connections, halyard swivel, webbing/ rope kit, 3 standard and 1 articulated fairleads.
The Facnor FlatDeck Cruising range
Facnor FD Datasheet
Facnor FD Range Dimensions
Facnor Foil Sections Connectors Datasheet
Facnor Foil Sections Datasheet
Facnor FlatDeck installation manual
Not enough rope in stock to fulfil your required length.
It will be available within 14 days, otherwise, please try an alternative colour.