- Drum diameter (mm):179
- Rope diameter (mm):8
- Recommended Boat size - Min (ft):26
- Recommended Boat size - Max (ft):36
- A (mm):500
- B (mm):30
- C (mm):179
- Headstay length Std. (mm):13000
- Headstay length Max (mm):15000
- Wire diameter Max (mm):8
- Rod Dash size Max:-10
- Luff tape (mm):5
- Extrusion weight (g/m):660
- Extrusion Diameter (mm):23
- Extrusion Section Code:BMG30R
- Luff Groove (Single/Double):D
The GFM range (Genoa Furling - Manual) is Bamar’s genoa reefing furler, with aluminium foil sections. The range is available in different sizes C0, C0T, C1, C2, C3, C4 and C5, for wire diameters from 7 – 16mm (rod #10 - #40).
By having a drum and halyard swivel rotating on a double ball bearing race, Bamar ensures a very smooth furl with no lubrication or maintenance required. The drum, entirely made in anodized aluminium alloy, has a central hollow section to accommodate an internal turnbuckle. The complete setup has been designed to be easily fitted using simple tools.
The C1 model is designed to take 8,10 or 12mm diameter chain plate pins. The drum comes with long link plates which can be cut to length to customize tack height. The connection between two foils sections is made using an aluminium splice piece that is inserted inside the foils to ensure a perfect alignment.
The C1 standard furler set includes: Bamar GFM Drum kit C1, Basic foil kit BMG 30R and 7 additional BMG 30R foil sections.
(N.B. The number of foil sections has been calculated to make up a standard 13m stay, additional foil sections can be bought separately)
The standard C1 drum kit includes: the furling drum assembly, link plates and HR shackles.
The basic C1 Foil kit BMG 30R includes: splice pieces, a halyard swivel and 2.5m BMG 30Rfurling foils. Allen screw and liquid sealant are supplied to lock splice pieces tightly.
The Bamar GFM range
Bamar GFM C0T & C1 installation manual - EN/IT