- Drum diameter (mm):132
- Rope diameter (mm):6
- Recommended Boat size - Min (ft):20
- Recommended Boat size - Max (ft):30
- A (mm):482
- B (mm):28
- C (mm):132
- Headstay length Std. (mm):8500
- Headstay length Max (mm):10500
- Wire diameter Max (mm):4
- Rod Dash size Max:-10
- Luff tape (mm):5
- Extrusion weight (g/m):660
- Extrusion Diameter (mm):23
- Extrusion Section Code:BMG30R
- Luff Groove (Single/Double):D
The GFM range (Genoa Furling - Manual) is Bamar’s genoa reefing furler, with aluminium foil sections. The range is available in 7 different sizes C0, C0T, C1, C2, C3, C4 and C5, for wire diameters from 7 – 16mm (rod #10 - #40).
By having a drum and halyard swivel rotating on a double ball bearing race, Bamar ensures a very smooth furl with no lubrication or maintenance required. The drum, entirely made in anodized aluminium alloy, has a central hollow section to accommodate an internal turnbuckle. The complete setup has been designed to be easily fitted using simple tools.
The C0T model is designed to take 8,10 or 12mm diameter chain plate pins. The drum comes with long link plates which can be cut to length to customize tack height.
The connection between two foils sections is made using an aluminium splice piece that is inserted inside the foils to ensure a perfect alignment.
The C0T standard furler set includes: Bamar GFM Drum kit C0T, Basic foil kit BMG 30R and 4 additional BMG 30R foil sections.
(N.B. The number of foil sections has been calculated to make up a standard 8,5m stay, additional foil sections can be bought separately)
The standard C0T drum kit includes: the furling drum assembly, link plates and HR shackles.
The Basic Foil kit BMG 30R includes: splice pieces, a halyard swivel, halyard swivel retainer block and 2.5m BMG 30R furling foils. Allen screw and liquid sealant are supplied to lock splice pieces tightly.
The Bamar GFM range
Bamar GFM C0T & C1 installation manual - EN/IT